Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
모형: HLG-150H
상표: Meanwell
포장: 상자
생산력: 20000pcs per month
수송: Ocean,Land,Air
원산지: 광둥, 중국
지원에 대한 지원: 5000pcs per month
포트: Shenzhen,Guangzhou,Hongkong
지불 유형: T/T,Paypal,Money Gram,Western Union
인 코텀: FOB,CIF
HLG-150H Meanwell 방수 LED 전원 공급 장치
제품 설명
방수 150W 단일 출력 스위칭 전원 공급 장치 , 등 다른 입력 전압 특수 램프의 다른 모델 (12), H-150 HLG -1 5 HLG-150 H -24 - 널리 Iseeled`들에서 사용되는 모델은 다음과 램프 HLG H-150을 이끌었다.
HLG-150 H -12 블랭크 : IP67 등급. I / O 연결 용 케이블.
HLG-150 H -12A : IP65 등급. 출력 전압과 정전류 레벨은 내부 포텐쇼미터를 통해 조정할 수 있습니다.
HLG-150 H -12B : IP67 등급. 일정한 전류 레벨은 출력 케이블을 통해 1 ~ 10Vdc 또는 PWM 신호 또는 저항으로 조정 가능.
HLG-150 H -12D (옵션) : IP67 등급. 타이머 조광 기능은 자세한 내용은 MEAN WELL에 문의하십시오.
Model |
HLG-150H-12 |
HLG-150H-15 |
HLG-150H-24 |
|
Output |
DC VOLTAGE |
12V |
15V |
24V |
CURRENT ADJ. RANGE |
Can be adjusted by internal potentiometer A type only |
|||
7.5-12.5A |
6-10A |
3.8-6.3A |
||
RATED POWER |
150W |
150W |
151.2W |
|
VOLTAGE ADJ. RANGE |
10.8-13.5V |
13.5-17V |
22-27V |
|
Input |
Voltage Range |
90-264VAC 127-370V DC |
||
Frequency Range |
47-63Hz |
|||
POWER FACTOR |
PF>0.98/115VAC, PF>0.95/230VAC, at full load (Please refer to "Power Factor Characteristic" curve) |
|||
Efficiency(Typ.)(230Vac) |
92% |
92.5% |
93.5% |
|
AC CURRENT (Typ.) |
1.7A / 115VAC 0.75A / 230VAC |
|||
INRUSH CURRENT(Typ.) |
COLD START 75A/230VAC |
|||
LEAKAGE CURRENT |
<0.75mA / 240VAC |
|||
PROTECTION |
OVER LOAD |
95~ 108% |
||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||
SHORT CIRCUIT |
Constant current limiting, recovers automatically after fault condition is removed |
|||
OVER VOLTAGE |
14-17V |
18-21V |
28-34V |
|
Protection type :Shut down O/P voltage, re-power on to recover |
||||
OVER TEMPERATURE |
100 ℃ up or less10 ℃ (RTH2) |
|||
Protection type : Shut down and latch off o/p voltage, recovers automatically after temperature goes down |
||||
Environment |
WORKING TEMP. |
-40 ~ +70 ℃(Refer to output load derating curve) |
||
WORKING HUMIDITY |
20 ~ 95% RH non-condensing |
|||
SAFETY |
SAFETY STANDARDS |
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 |
||
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
|||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH |
|||
EMC EMISSION |
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 |
|||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A |
|||
Others |
MTBF |
192.2K hrs min. MIL-HDBK-217F (25℃ ) |
||
DIMENSION |
228*68*38.8mm (L*W*H) |
|||
PACKING |
1.15Kg; 12pcs/14.8Kg/0.8CUFT |
|||
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Type A only. 6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Refer to warranty statement. |
1. 특별히 언급되지 않은 모든 파라미터는 230VAC 입력, 정격 부하 및 주변 온도 25에서 측정됩니다. 노트
2. 리플 및 잡음은 0.1uf 및 47uf 병렬 커패시터로 종단 처리 된 12 "트위스트 페어 와이어를 사용하여 20MHz 대역폭에서 측정됩니다.
3. 공차 : 셋업 허용 오차, 라인 조정 및 부하 조정을 포함합니다.
4. 낮은 입력 전압에서 디 레이팅이 필요할 수 있습니다. 자세한 내용은 정적 특성을 확인하십시오.
5. A 만 입력하십시오.
6. 안전 및 EMC 설계는 EN60598-1, CNS15233, GB7000.1, FCC part18을 참조하십시오.
7. 설정 시간은 콜드 첫 번째 시작시 측정됩니다. 전원을 ON / OFF하면 설정 시간이 길어질 수 있습니다.
8. 전원 공급 장치는 최종 장비와 함께 작동되는 구성 요소로 간주됩니다. EMC 성능은 전체 설치시 최종 장비 제조업체는 전체 설치시 EMC 지침을 다시 준수해야합니다.
9. 보증서를 참조하십시오.제품 디렉토리 : LED 액세서리 > Meanwell 방수 전원 공급 장치
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.