Dmx512 is a very simple and practical controller. This controller is suitable for the international standard general signal as a transmission protocol. It is simple and efficient. The signal of DMX belongs to 465 signal, also called parallel signal, but it is similar to the installation method. The serial signal is easy to misunderstand from the appearance. The DMX512 controller actually uses parallel signals, and the receivers are connected in parallel on which controller. Let's take a look at the description and introduction of the DMX512 controller.
product description:
ISEELED control system divide into 2 types: Artnet controller and standalone controller
Artnet Controller
1. Artnet Controller include 3 parts, 1st is standard 8/16 node,2nd is 1/4/12/20/30 lightning series, 3rd is easy artnet
2. The Artnet DMX controller Completely follow standard USITT
DMX512/1990 protocol and the expanded DMX512 protocol,
3. The Artnet DMX controlller also compatible with WS2801,WS2811, SM16716, TM1804, UCS1903 etc with external DMX decoder
4. Compatible with Art-net protocol and Madrix software
which allows music to lights and sound to lights
5. RJ45 in & out, with built in switch, realize series connection between different Artnet DMX controller
6. Protections: short circuit, over current , over temperature .
Application: adapted for all kinds of led lighting control with dmx 512 protocol way.
Standalone controller
1,it's SD Card controller, it can select the controller model from 1024Pixel and 2048Pixel
2, Most of the IC Driver LED lights can read by this SD LED controller,
3, DIP switch to set the play mode, programs and speed,
4, Only take the SD card in and out when controller power off,
5, SD card supports FAT32 and FAT16 format, the maximum capacity is 64G bytes, stores maximum 64 DAT files.
6, Protections: short circuit, over current , over temperature .
Application: adapted for all kinds of led lighting under standalone control, pre-program the data and play when power on lights and controll
